The APSAM universal articulating arm mount supports virtually any display up to 55-Inch with hole patterns up to 27.7-Inch horizontally and 19-Inch vertically. The APSAM also features a full 27-Inch of extension and up to 150 degrees of rotation for larger displays, it also folds to a low 3.5-Inch profile as has +/-15 degrees of tilt. The APSAM mount is designed with a lift and lock design for ease of installation and is constructed with a 17-Inch wall plate which is specifically designed for installation to standard 16-Inch studs. The APSAM is well constructed with 27 LBS of 100% High Grade Steel providing a sturdy and reliable mount.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.
Does the job, but I'm disappointed with the end result
I just installed this wall mount for use with a 42" Philips plasma screen TV. As you can see from the picture, the mount basically consists of two plates connected by an articulating arm, which provides the swivel action. The TV is secured to the larger of the two plates via the supplied brackets, which provide the tilt action. The mount itself comes pre-assembled and thus requires only installation onto the wall; similarly, the brackets are also pre-assembled (with the exception of a pair of adjustment knobs for the tilt mechanism which for some reason are not mentioned at all in the installation instructions), and need only be screwed into the back of the TV.
Despite some headaches presented by the construction of my wall (I rent an apartment in an old building in Brooklyn where there is apparently an inch-and-a-half of plaster overlying drywall and studs), I was able to install the smaller plate into the wall using some cheap-but-sturdy toggler anchors from the local...
Click here to read the full review for more information about this product.
Really good except for one issue
I just finished installing this mount and my 50" Panasonic plasma. I bought the articulating mount so I could position the TV in the corner. This means I mounted it towards the corner of one wall and used the articulation to move it to a diagonal position where the edges are flush against adjacent walls.
This mount was very easy to install. Instructions were great. I really liked the built-in level. It was easy to get the plasma on the mount with two people.
The one issue I had was with the tv actually being level. The tv is level when it's flat against the wall. When I articulate it out a bit and to the right, the right edge dips. It's obvious enough to bother me. What I did was adjust one of the brackets that bolt to the tv. I purposely had one bracket one position different (higher) than the other. This resulted in leveling the tv when articulated. However, when I put the tv back against one wall, it's grossly off level. That's ok for me because...
Not easy to install, but worth the money if you know what you're doing
Although I'm not a "Professional" installer, this installation makes the 8th Plasma/LCD wall mount installation I've done over the years. I've often spent over $250+ on previous wall kits and thought after reading the previous customer feedbacks; I would save some money and try something new.
In the past I've almost always bought OmniMount wall mounts, primarily due their ease of installation. This product was NOT easy to install, and had I not had prior experience hanging TV's, this COULD HAVE proven to be a disaster.
For starters, there is no "Template" to assist with hole drilling, not even a listed measurement to show how much space to drill the upper and lower holes. This is something that is standard with OmniMount and something I missed having. Holding the mount on the wall to Pencil or mark the holes can be a chore unless you know EXACTLY where the studs are and you have more than one set of hands. If you have some carpenter skills, you'll be able to...
Product Features :
- Collapses to less than 4" from the wall
- Extends to a full 26" from the wall
- High quality powder coat finish
- Built-in bubble level in wall plate
- Dual safety screws to lock TV Position
Rating : 4.4
List Price : $159.96
0 comments:
Post a Comment