The VideoSecu dual arm articulating wall mount constructed with solid heavy duty steel, support most 32" - 65" flat screen TV with mounting hole pattern up to 24 inch wide and 16 inch high (VESA 600x400 600x300 600x200 500x300 400x400 400x200 200x200 200x100mm). Dual arm design allows forward tilt, 160 degrees side-to-side swivel (The max degree is depending on your display size) and extends the flat panel screen up to 21" from wall to achieve vast range of viewing angles. Post installation level adjustment allows left and right rotation for perfect level in different view angles. The wall plate is more than 24" wide, so it is easy to mount into studs up to 24" (standard stud is 16"). Additionally, security screws lock the TV bracket to the wall mount from the bottom. How to ensure the mount compliance with your selected display? First, the weight of your display should be less than 165lbs. Next, mounting holes distance on the rear of TV must be less than 24" (600mm) horizontally and 16" (400mm) vertically. Last, your TV should be at least 32 inch wide. Otherwise, you will see the bracket. VideoSecu brand articulating mount. Please report to Amazon if the product you received do not bear VideoSecu logo.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.
Works very well for the price
I think this is a good bargain. Hold my 40" Proscan LCD nicely (40 something pound).
It is not super heavy duty but strong enough for new larger LCD TVs
(you might want a heavy duty hanger for larger heavy plasma TVs)
1. You fist assemble the vertical bars then secure it to the wall.
2, You then attach the back plate and TV holding bar to your TV
(it even comes with spacer and many many screws for different type of VESA standard mount, nice!)
3. You then hang your TV to the mount (using the hooks on the top of the TV plate)
4. Slide your TV left or right to position you want
5. Adjust the tile angle with the built-in screw with handle (nice feature)
6. Screw down the 2 secure screws at the bottom of the mount so the TV will not accidentally pop-out.
7. Enjoy your TV.
This is really a good deal (Thirty something with shipping, very good deal).
BTW, the bubble level come in the mount is not mount properly...
Click here to read the full review for more information about this product.
Pretty good, but keep the following in mind....
Mounted our new 65" plasma weighing about 105 pounds according to mfg. I realize it is a couple inches larger than specs say, but this tv is also below weight, so you decide.
Biggest problem was with the bracket that mounts to the wall. It is only about 18" wide. The issue is when it comes to centering on the wall. On our wall, in order to mount this bracket on two studs, the bracket has to be about 4" off center. Since I have such a wide tv, that means that the VESA mount is at the limit on the bracket, and thus you do not have any room to move the tv from side to side on the mount. Further, if the tv is off center on this bracket, it tends to make the tv a bit off balance. Again, the tv we are using is much below the recommended weight, so seems like that shouldn't happen.
I ended up mounting a 3/4 inch plywood board to wall, covering 3 studs, and then mounting this bracket to that board. The tv hides the board, so not really an issue, and it is painted to...
THIS IS A STEAL!!!
I bought this wall mount for my 58" plasma that weighs in at 160 pounds. The installation is quick and easy, and this thing will hold some weight!
In order to set/adjust the tilt you will need to read the other reviews. They mention ways of sticking screws in the slot to stop the TV from dipping too far down. This is an easy fix. The only difference between the $$300 mount at the store and this one is you will need to do this for heavier TVs.
Save your money... Buy this.
Product Features :
- Fits most 32-65 inch TV with mounting hole pattern 200x100 to 600 x 400mm
- Heavy steel construction, maximum loading capacity to 165 lbs; The wide wall plate support up to 24" studs
- Minimum mounting profile 4.5", extends to 21"; Adjustable 15 degrees forward tilt
- Post-installation level adjustment allows the TV to perfectly level; assembly required
- Standard mounting hardware and user manual included
Rating : 4.5
List Price : $324.95
0 comments:
Post a Comment